FAQs & Troubleshooting
![]() |
Popular |
109 Results
- 1How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 2How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 3Combination of fabric, thread and needle
- 4How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 5"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 6How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 7"Preventive maintenance is recommended" appears on the LCD.
- 8How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 9How do I clean the race?
- 10"This USB media cannot be used." message appears on the LCD. What does it mean?
- 11"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 12How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 13How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 14How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 15"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 16How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 17How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 18"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 19"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 20"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 21"Set the clock." message appears on the LCD. What does it mean?
- 22"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 23"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 24Fabric and Thread
- 25"This file cannot be used." message appears on the LCD. What does it mean?
- 26"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 27"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 28"OK to delete the setting?" message appears on the LCD. What does it mean?
- 29"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 30"Transmitting by USB" message appears on the LCD. What does it mean?
- 31"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 32"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 33When thread got tangled.
- 34How do I remove or attach the presser foot holder?
- 35"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 36"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 37"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 38"Failed to save file." message appears on the LCD. What does it mean?
- 39"This USB media is incompatible." message appears on the LCD. What does it mean?
- 40"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 41"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 42How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 43How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 44How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 45How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 46How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 47"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 48"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 49"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 50"Raise the buttonhole lever." message appears on the LCD. What does it mean?