FAQs & Troubleshooting
Popular |
169 Results
- 1How do I insert the bobbin case in the machine?
- 2How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 3How to use the Multi-purpose Screwdriver.
- 4How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 5How do I correctly install a bobbin?
- 6Why does the lower thread keep breaking?
- 7How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 8How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 9Place a spool of thread on a spool pin.
- 10The needle strikes the presser foot
- 11How do I use a prewound bobbin?
- 12"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 13How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 14How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 15It is difficult to pass the thread through the needle bar thread guide(hook).
- 16How do I recall a specific embroidery pattern from the computer?
- 17"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 18How do I remove the presser foot holder?
- 19"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 20"The needle is down. Press the needle position button to raise the needle." message appears on the LCD. What does it mean?
- 21The machine stops and displays error message "Fabric edge is not recognized at this point" while edge sewing though the stitching is not reaching near the edge of the fabric.
- 22Though touching "OK" on "Attach vertical stitch alignment foot and edge sewing sheet" window, the same window still appears.
- 23"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 24"This USB media cannot be used." message appears on the LCD. What does it mean?
- 25"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 26Embroidery
- 27"Make sure embroidery frame is moved as far back as possible. LOCK DOWN THE FRAME-SECURING LEVER." message appears on the LCD. What does it mean?
- 28How do I thread my machine ?
- 29Fabrics and stabilizer material for embroidery
- 30The bobbin thread cannot be pulled up.
- 31The machine does not make stitches
- 32"This file cannot be used." message appears on the LCD. What does it mean?
- 33How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 34How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 35How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 36How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 37How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 38How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 39How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 40When can we use Standard GREEN Marked Bobbin Case?
- 41How do I wind the bobbin?
- 42Sewing is started even though the presser foot is raised.
- 43"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 44"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 45"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 46"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 47How to clean the bobbin case(pink marking or no marking) when using a prewound bobbin.
- 48How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 49"Preventive maintenance is recommended" appears on the LCD.
- 50Combination of fabric, thread and needle