FAQs & Troubleshooting
Popular |
169 Results
- 51If the thread breaks during sewing.
- 52Why is there an extra needle plate supplied with my machine?
- 53The machine does not make stitches
- 54"Use the presser foot lifter button to raise the presser foot." message appears on the LCD. What does it mean?
- 55How do I attach or remove the Embroidery Unit?
- 56How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 57How do I wind the bobbin?
- 58Sewing is started even though the presser foot is raised.
- 59"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 60"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?
- 61"Select a pattern." message appears on the LCD. What does it mean?
- 62When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 63Embroidery
- 64Place a spool of thread on a spool pin.
- 65When thread got tangled.
- 66When can we use Standard GREEN Marked Bobbin Case?
- 67The needle strikes the presser foot
- 68How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 69How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 70For better results when sewing stretch fabrics
- 71"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 72How do I attach the walking foot ?
- 73How do I change the needle ?
- 74How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 75It is difficult to pass the thread through the needle bar thread guide(hook).
- 76How do I create a space between characters?
- 77"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 78The thread tension is incorrect.
- 79How do I sew such as vinyl, leather, quilting layers and velvet?
- 80"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 81I've run out of pre-packaged Embroidery positioning stickers. How can I get extra stickers?
- 82"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 83"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 84How do I sew a blind hem?
- 85Upper threading (Point)
- 86How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 87"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 88"This file cannot be used." message appears on the LCD. What does it mean?
- 89"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 90"OK to delete the selected picture?" message appears on the LCD. What does it mean?
- 91How do I change the volume of operation sounds or alarm sounds?
- 92How do I attach or remove the embroidery frame ?
- 93How do I set the bobbin ?
- 94The machine stops and displays error message "Fabric edge is not recognized at this point" while edge sewing though the stitching is not reaching near the edge of the fabric.
- 95Though touching "OK" on "Attach vertical stitch alignment foot and edge sewing sheet" window, the same window still appears.
- 96How do I place edge sewing sheet?
- 97"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 98"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 99"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 100How to clean the bobbin case(pink marking or no marking) when using a prewound bobbin.