FAQs & Troubleshooting
 |
Popular |
65 Results
- 1Combination of fabric, thread and needle
- 2When thread got tangled.
- 3Why does the lower thread keep breaking?
- 4Fabric and Thread
- 5When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 6It is difficult to pass the thread through the needle bar thread guide(hook).
- 7How do I clean the race?
- 8How do I remove the presser foot holder?
- 9Embroidery
- 10Place a spool of thread on a spool pin.
- 11How do I create a space between characters?
- 12How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 13Where do I put the oil in my machine?
- 14How do I sew such as vinyl, leather, quilting layers and velvet?
- 15The thread tension is incorrect.
- 16How do I load the spool into the thread cassette?
- 17"Finish editing the pattern before sewing the pattern." message appearing on the LCD. What does it mean?
- 18My auto threader is not working. What should I do?
- 19How do I correctly install a bobbin?
- 20Upper Threading (Using the twin needle)
- 21When should I use the extra spool pin?
- 22"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 23How do I sew buttonholes?
- 24How do I wind the bobbin?
- 25Why does my thread keep jamming?
- 26Why is the outline sewing off the pattern?
- 27The thread is looping when I try to wind a bobbin.
- 28How do I thread the needle?
- 29"Calculating the time required... Please wait." appears on the LCD.
- 30"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 31"Insert thread cassette." message appearing on the LCD. What does it mean?
- 32How do I sew an applique?
- 33When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 34"Turn off the power and insert an embroidery card." appears on the LCD.
- 35"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 36"Selected a pattern." appears on the LCD.
- 37"Delete the selected pattern." appears on the LCD.
- 38"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 39"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 40Why does the upper thread keep breaking?
- 41How do I sew a blind hem?
- 42Incorrect thread tension
- 43"Lower the presser foot lever." appears on the LCD.
- 44"This embroidery pattern can not be used on this machine." appears on the LCD.
- 45"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 46"Twin needles can not be used for this pattern." appears on the LCD.
- 47"Change to the single needle mode." appears on the LCD.
- 48How do I manually thread the needle?
- 49"Saved on another embroidery card." appears on the LCD.
- 50"Saving..." message appearing on the LCD. What does it mean?
