FAQs & Troubleshooting
![]() |
Popular |
299 Results
- 1List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 2Mat and Cutting Blade Combinations
- 3List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 4The mat or the material catches on a feed roller during cutting/drawing.
- 5Preparation of Craft Paper / Fabric
- 6Adjusting the Blade Extension
- 7About Blade Extension, Cutting Pressure and Mat
- 8Downloading Optional Design Pattern Collection
- 9The mat is fed in at an angle and is not fed during cutting / drawing.
- 10If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 11Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 12Mat and Material Combinations
- 13List of Error Messages for CanvasWorkspace (Others)
- 14How to Activate a Premium Function on CanvasWorkspace for PC [Video]
- 15The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 16Can the Cutting mat or Scanning mat for the ScanNCut (CM series) be used in the ScanNCut DX (SDX series)?
- 17Can I create the cutting data for ScanNCut from vector graphics data?
- 18Scanning a Background Image (Background Scanning).
- 19Attaching & Peeling Off the Material
- 20Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
- 21E12003 appears on the computer screen.
- 22E10007 appears on the computer screen.
- 23Replacement Criteria
- 24What should I do if the scanned and cut positions are misaligned?
- 25What is the Difference between "Pen Holder", "Universal Pen Holder" and "Small Barrel Pan Holder"?
- 26When I created a cutting data scanning my illustration, some areas were not converted to the cutting lines.
- 27Can I create the cutting data for ScanNCut from the image data?
- 28The machine is turned off (Auto Shut Down).
- 29The mat or the material catches on a feed roller when the mat is being inserted.
- 30“The entered text cannot be used.“ appears on the computer screen.
- 31ErrS52 appears on the computer screen.
- 32E10001 appears on the computer screen.
- 33E00001 appears on the computer screen.
- 34Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 35What type of data can my ScanNCut machine be used?
- 36ErrS10 appears on the computer screen.
- 37ErrS07 appears on the computer screen.
- 38ErrS02 appears on the computer screen.
- 39E10006 appears on the computer screen.
- 40E02005 appears on the computer screen.
- 41Can different types of material be attached to the same mat for cutting?
- 42N10004 appears on the computer screen.
- 43E00006 appears on the computer screen.
- 44How to use Enhanced Image Tracing function. [Video]
- 45Where can I purchase any consumables or options for Brother Cutting Machine?
- 46How do I Scan for Cutting (Direct Cut) ?
- 47How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 48E11010 appears on the computer screen.
- 49E10005 appears on the computer screen.
- 50E03005 appears on the computer screen.