FAQs & Troubleshooting
Popular |
33 Results
- 1How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 2How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 3Oiling
- 4How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 5How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 6Differential feed adjustment
- 7To secure chains
- 8Cleaning
- 9If threads break during sewing
- 10Skipped stitches
- 11Threading the lower looper
- 12How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 13How to set the thread change assembly (Two-thread sewing)
- 14Using the wide table
- 15Fabric is puckered
- 16Needles break
- 17The fabric does not feed through.
- 18Preparation before threading
- 19Adjusting the thread tension dials
- 20How to attach and remove the presser foot
- 21Sewing Materials, Threads and Needles Comparison Chart
- 22Stitches are not uniform
- 23Threads break
- 24Threading the left needle
- 25Threading the right needle
- 26How to use the thread spool cap
- 27Adjusting the presser foot pressure
- 28How to remove and install the needle
- 29Needle
- 30Retracting knife
- 31Free-arm sewing (removing bed extension)
- 32Threading the upper looper
- 33THREADING