FAQs & Troubleshooting
 |
Popular |
94 Results
- 1How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 2How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 3How to Embroider on Bag. [Video instructions]
- 4How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 5How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 6How to use the Round frame (PRPRFK1) [Video instructions]
- 7How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 8"Inappropriate needle stop position" message appears on the LCD. What does it mean?
- 9How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 10How to use the the versatile magnetic frame [Video instructions]
- 11Maintenance (Clean the hook) [ Video ]
- 12Maintenance (Cleaning around the needle plate) [ Video ]
- 13How to Embroider on Cap. [Video instructions]
- 14Maintenance (Cleaning the bobbin case) [ Video ]
- 15Maintenance (Oiling the machine)
- 16"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 17"Please go to either Embroidering Screen or Embroidering Settings Screen to use the Thread Trimmer." message appears on the LCD. What does it mean?
- 18"Can't use this key during camera mode." message appears on the LCD. What does it mean?
- 19How to Embroider on Shoes. [Video instructions]
- 20"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?
- 21Maintenance (Oiling the machine) [ Video ]
- 22Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 23"Needle threader error" message appears on the LCD. What does it mean?
- 24Hooping the Fabric
- 25"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 26"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 27"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 28"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 29Maintenance (Cleaning the bobbin case)
- 30Maintenance (Clean the hook)
- 31How do I create a space between characters?
- 32Stabilizers (Backing)
- 33Embroidery
- 34Fabric and Thread
- 35"Transmitting by USB" message appears on the LCD. What does it mean?
- 36"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 37"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 38"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?
- 39"Trimming sensor error." message appears on the LCD. What does it mean?
- 40"This pattern cannot combine." message appears on the LCD. What does it mean?
- 41"OK to cancel embroidering?" message appears on the LCD. What does it mean?
- 42"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 43"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 44How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 45"OK to delete the selected picture?" message appears on the LCD. What does it mean?
- 46"Needle bar case home position error." message appears on the LCD. What does it mean?
- 47"Needle case motor has been locked." message appears on the LCD. What does it mean?
- 48"Needle bar case position error" message appears on the LCD. What does it mean?
- 49How do I thread the machine? (Threading the upper thread)
- 50How do I install the bobbin wound with thread?
