FAQs & Troubleshooting
Popular |
56 Results
- 1Basic operations and embroidery functions [Video instructions]
- 2Touch panel is malfunctioning.
- 3How do I adjust thread tension for embroidering?
- 4How do I thread the machine (Threading the upper thread)?
- 5How do I wind the bobbin?
- 6How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?
- 7How do I hoop the fabric in the embroidery frame?
- 8How do I set the bobbin?
- 9How do I adjust the sensitivity of the operation keys?
- 10How do I change the needle ?
- 11Tips for getting better embroidery results
- 12How do I remove or attach the Embroidery foot ?
- 13How to use the memory function to save embroidery patterns
- 14It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 15How do I clean the race?
- 16Fabric puckers
- 17How do I retrieve embroidery patterns saved in the machine's memory or a USB flash drive?
- 18How do I attach or remove the embroidery frame ?
- 19Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 20Embroidery
- 21How to change the needle stop position
- 22Upper thread breaks.
- 23Stitches are skipped
- 24"F06" appears on the LCD. What does it mean?
- 25Needle breaks.
- 26Where do I put the oil in my machine?
- 27"USB media error" message appears on the LCD. What does it mean?
- 28"Preventive maintenance is recommended." ppears on the LCD.
- 29"Not enough available memory to save the pattern. Delete another pattern?." message appears on the LCD. What does it mean?
- 30"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 31How do I attach or remove the Embroidery Unit?
- 32Bobbin thread breaks
- 33"F05" appears on the LCD. What does it mean?
- 34"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 35"This pattern cannot be used." message appears on the LCD. What does it mean?
- 36"F01" appears on the LCD. What does it mean?
- 37"Not enough available memory to save." message appears on the LCD. What does it mean?
- 38"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 39"The bobbin thread is almost empty." message appears on the LCD during embroidering and the machine has stopped. What does it mean?
- 40"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 41"F07" appears on the LCD. What does it mean?
- 42"F03" appears on the LCD. What does it mean?
- 43"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 44"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 45"This USB media cannot be used." message appears on the LCD. What does it mean?
- 46"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 47"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 48"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 49When the thread became tangled under the bobbin winder seat
- 50"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?