FAQs & Troubleshooting
![]() |
Popular |
54 Results
- 1How do I select or display patterns according to the embroidery frame size?
- 2Tutorial videos on how to use the machine [Video instructions]
- 3How do I adjust thread tension for embroidering?
- 4How do I adjust the sensitivity of the operation keys?
- 5How do I hoop the fabric in the embroidery frame?
- 6Where do I put the oil in my machine?
- 7How do I edit a single letter in the embroidery pattern?
- 8How do I thread the machine (Threading the upper thread)?
- 9Fabric puckers
- 10How do I enter a line feed in the embroidery pattern?
- 11How do I set the bobbin ?
- 12How do I retrieve the patterns from the machine’s memory?
- 13Needle breaks.
- 14Stitches are skipped
- 15How do I save the embroidery patterns in the machine’s memory?
- 16When the thread became tangled under the bobbin winder seat
- 17"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
- 18"This USB media cannot be used." message appears on the LCD. What does it mean?
- 19How do I clean the race?
- 20"F**" appears on the LCD. What does it mean?
- 21"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 22How do I remove or attach the Embroidery foot ?
- 23How do I wind the bobbin?
- 24"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 25Upper thread breaks.
- 26Bobbin thread breaks
- 27How do I change the font type in the embroidery pattern?
- 28How do I attach or remove the Embroidery Unit?
- 29"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 30"Preventive maintenance is recommended" appears on the LCD.
- 31Embroidery
- 32"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 33"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
- 34"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 35How do I remove or attach the presser foot ?
- 36"USB media error" message appears on the LCD. What does it mean?
- 37"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 38"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 39"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 40"Not enough available memory to save." message appears on the LCD. What does it mean?
- 41"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 42How do I change the needle ?
- 43"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean and how do I clear it?
- 44"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean and how do I clear it?
- 45"This pattern cannot be used." message appears on the LCD. What does it mean?
- 46How do I attach or remove the embroidery frame ?
- 47"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 48"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 49"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 50"Check and rethread the upper thread." message appears on the LCD. What does it mean?