FAQs & Troubleshooting
Popular |
94 Results
- 1How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 2How to Embroider on Shoes. [Video instructions]
- 3How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 4How to Embroider on Pet Collar. [Video instructions]
- 5How to Embroider on Clothes. [Video instructions]
- 6How to use the the versatile magnetic frame [Video instructions]
- 7How to Embroider on Bag. [Video instructions]
- 8How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 9How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 10How to set up the cap frame. [Video instructions]
- 11How to Embroider on Cap. [Video instructions]
- 12How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 13How to use the Round frame (PRPRFK1) [Video instructions]
- 14How to set up the cap frame driver. [Video instructions]
- 15"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 16How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 17Maintenance (Cleaning around the needle plate) [ Video ]
- 18There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 19Embroidery
- 20Maintenance (Oiling the machine) [ Video ]
- 21Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 22Maintenance (Oiling the machine)
- 23"Inappropriate needle stop position" message appears on the LCD. What does it mean?
- 24Fabric and Thread
- 25Maintenance (Clean the hook) [ Video ]
- 26When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 27Stabilizers (Backing)
- 28How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 29Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 30How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 31Fabric/stabilizer compatibility chart
- 32"Check upper and bobbin thread." message appears on the LCD. What does it mean?
- 33Maintenance (Cleaning the bobbin case) [ Video ]
- 34"Can't use this key during camera mode." message appears on the LCD. What does it mean?
- 35How do I create a space between characters?
- 36"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 37"This pattern cannot be used." message appears on the LCD. What does it mean?
- 38"OK to delete the selected picture?" message appears on the LCD. What does it mean?
- 39Maintenance (Cleaning the thread paths of the upper threads)
- 40"Stop while needle bar case transferring." message appears on the LCD. What does it mean?
- 41Hooping the Fabric
- 42"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?
- 43"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 44"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 45"This USB media cannot be used." message appears on the LCD. What does it mean?
- 46"This pattern cannot combine." message appears on the LCD. What does it mean?
- 47"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 48"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean?
- 49"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 50"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?