FAQs & Troubleshooting
![]() |
Popular |
125 Results
- 51How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 52"Set the clock." message appears on the LCD. What does it mean?
- 53"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 54"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 55How do I specify the needle drop position using the sensor pen?
- 56How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 57How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 58"USB media error" message appears on the LCD. What does it mean?
- 59"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 60"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 61"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 62"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 63The bobbin thread cannot be pulled up.
- 64The machine does not make stitches
- 65For better results when sewing stretch fabrics
- 66"Sensor module error." message appears on the LCD. What does it mean?
- 67"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 68How do I change the needle ?
- 69"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 70How do I specify the sewing end point with the sensor pen for utility stitches/ character decorative stitches?
- 71"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 72"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 73"This file cannot be used." message appears on the LCD. What does it mean?
- 74How do I set the bobbin ?
- 75How do I wind the bobbin?
- 76"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 77"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 78"This USB media cannot be used." message appears on the LCD. What does it mean?
- 79The thread tension is incorrect.
- 80How do I sew an applique?
- 81"The needle position cannot be changed for this stitch." message appears on the LCD. What does it mean?
- 82"OK to delete the setting?" message appears on the LCD. What does it mean?
- 83"OK to delete the ending point setting?" message appears on the LCD. What does it mean?
- 84How to specify the Guideline Marker Position With the Sensor Pen
- 85How do I attach the walking foot ?
- 86How do I thread my machine when using the twin needle mode ?
- 87"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 88"This USB media is incompatible." message appears on the LCD. What does it mean?
- 89"Transmitting by USB" message appears on the LCD. What does it mean?
- 90"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 91"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 92Upper threading (Point)
- 93"An invalid area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- 94How do I change the volume of operation sounds or alarm sounds?
- 95"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 96"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 97"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 98How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 99How do I remove or attach the presser foot holder?
- 100How do I specify the sewing end point with the sensor pen for utility stitches?