FAQs & Troubleshooting
Popular |
96 Results
- 51How do I correctly install a bobbin?
- 52How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 53How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 54How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 55Why is the outline sewing off the pattern?
- 56How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 57How do I thread the needle?
- 58How do I wind the bobbin?
- 59"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 60"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 61"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 62"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 63The thread tension is incorrect.
- 64Embroidery
- 65Upper threading (Point)
- 66Incorrect thread tension
- 67For better results when sewing stretch fabrics
- 68"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 69"Change to the single needle mode." appears on the LCD.
- 70"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 71Why does the upper thread keep breaking?
- 72How do I sew buttonholes?
- 73Fabrics and stabilizer material for embroidery
- 74"Lower the presser foot lever." appears on the LCD.
- 75With free-motion quilting, skipped stitches or needle breakage occur
- 76When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 77"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 78"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 79"Saving..." message appearing on the LCD. What does it mean?
- 80"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 81"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 82"Lift the buttonhole lever." appears on the LCD.
- 83How do I sew an applique?
- 84How do I sew a blind hem?
- 85How do I save often-used patterns in the machine's memory?
- 86"OK to save the current settings?" message appearing on the LCD. What does it mean?
- 87"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 88"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 89"Lower the buttonhole lever." appears on the LCD.
- 90"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 91How do I select patterns from the embroidery cards (sold separately)?
- 92"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 93"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 94"The safety device has been activated." appears on the LCD.
- 95Why does the needle keep breaking?
- 96How do I sew such as vinyl, leather, quilting layers and velvet?