FAQs & Troubleshooting
![]() |
Popular |
125 Results
- 51"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 52The machine does not make stitches
- 53"Set the clock." message appears on the LCD. What does it mean?
- 54"OK to delete the ending point setting?" message appears on the LCD. What does it mean?
- 55How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 56How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 57How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 58How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 59"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 60"This USB media is incompatible." message appears on the LCD. What does it mean?
- 61How do I change the needle ?
- 62"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 63How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 64"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 65"This file cannot be used." message appears on the LCD. What does it mean?
- 66"The needle position cannot be changed for this stitch." message appears on the LCD. What does it mean?
- 67"Sensor module error." message appears on the LCD. What does it mean?
- 68"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 69"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 70How do I specify the needle drop position using the sensor pen?
- 71How do I attach the walking foot ?
- 72"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 73"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 74"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 75"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 76"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 77The thread tension is incorrect.
- 78Upper threading (Point)
- 79How do I specify the sewing end point with the sensor pen for utility stitches?
- 80"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 81How do I create a space between characters?
- 82"This USB media cannot be used." message appears on the LCD. What does it mean?
- 83"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 84Why does the needle keep breaking?
- 85How do I sew an applique?
- 86How do I remove or attach the presser foot holder?
- 87"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 88"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 89"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
- 90"OK to delete the setting?" message appears on the LCD. What does it mean?
- 91"An invalid area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- 92How do I thread my machine when using the twin needle mode ?
- 93How do I wind the bobbin?
- 94"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 95"Transmitting by USB" message appears on the LCD. What does it mean?
- 96"USB media error" message appears on the LCD. What does it mean?
- 97"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 98"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 99"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 100"Lower the buttonhole lever." message appears on the LCD. What does it mean?