"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?

"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?

"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?

"OK to move the embroidery carriage to its original position?" message appears on the LCD. What does it mean?

"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?

"Cannot embroider since the embroidery unit is not attached. Turn off the machine, and then attach the embroidery unit." message appears on the LCD. What does it mean?

"OK to revert to previous color changes?" message appears on the LCD. What does it mean?

"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?

"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?

"The needle is down. Press the needle position button to raise the needle." message appears on the LCD. What does it mean?

"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?

"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?

"This embroidery card can not be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?

"Attach the embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?

"Before embroidering, make sure embroidery frame is moved as far back as possible and the frame-securing lever is locked down. Then, press "Start/Stop" button to embroidery." message appearing on the LCD. What does it mean and how do I clear it?

"Turn off the power and replace the needle plate." message appearing on the LCD. What does it mean and how do I clear it?

"Transmitting by USB" message appearing on the LCD. What does it mean and how do I clear it?

"USB media error" message appearing on the LCD. What does it mean and how do I clear it?

"The USB media was changed. Do not change the USB media while it is being read." message appearing on the LCD. What does it mean and how do I clear it?

"This USB media cannot be used." message appearing on the LCD. What does it mean and how do I clear it?

"USB media is not loaded. Load USB media." message appearing on the LCD. What does it mean and how do I clear it?

"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean and how do I clear it?

"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appearing on the LCD. What does it mean and how do I clear it?

"Change to the extra large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?

"Change to the large, or extra large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?

"Change to a larger embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?

"Can not change the configuration of the characters." message appearing on the LCD. What does it mean and how do I clear it?

"This key does not operate when the needle is down. Raise the needle and press the key again." message appearing on the LCD. What does it mean and how do I clear it?

"Data volume is too large for this pattern." message appearing on the LCD. What does it mean and how do I clear it?

"No more patterns can be added to this combination." message appearing on the LCD. What does it mean and how do I clear it?

"There is no embroidery card in card slot. Insert an embroidery card." message appearing on the LCD. What does it mean and how do I clear it?

"Lower the presser foot lever." appears on the LCD.

"Saving the upgrade file. Do not turn MAIN power to OFF." message appearing on the LCD. What does it mean and how do I clear it?

"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?

"In twin needle mode, the needle thread lever cannot be used." message appearing on the LCD. What does it mean and how do I clear it?

"Connected to PC. Do not disconnect the USB cable." message appearing on the LCD. What does it mean and how do I clear it?

"OK to automatically lower the presser foot?" message appearing on the LCD. What does it mean and how do I clear it?

"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." message appearing on the LCD. What does it mean and how do I clear it?

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.

"Not enough available memory to save the pattern. Delete another pattern?" message appearing on the LCD. What does it mean and how do I clear it?

"The bobbin thread is almost empty." message appearing on the LCD. What does it mean and how do I clear it?

"The bobbin winder safety device has activated. Is the thread tangled?" message appearing on the LCD. What does it mean and how do I clear it?

"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?

"Raise the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?

"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.

"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?

"Use the presser foot lifter button to lower the presser foot." message appearing on the LCD. What does it mean and how do I clear it?

"This pattern cannot be sewn with this mode." message appearing on the LCD. What does it mean and how do I clear it?

"This embroidery frame cannot be used." message appearing on the LCD. What does it mean and how do I clear it?