FAQs & Troubleshooting
![]() |
Popular |
111 Results
- 51"OK to delete the ending point setting?" message appears on the LCD. What does it mean?
- 52"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 53"An invalid area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- 54"An invalid sewing area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- 55How do I change the needle ?
- 56How do I thread my machine ?
- 57How do I set the bobbin ?
- 58How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 59How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 60How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 61How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 62How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 63How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 64How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 65How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 66How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 67How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 68How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 69How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 70How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 71How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 72How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 73How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 74How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 75How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 76How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 77How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 78How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 79How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 80How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 81How do I wind the bobbin?
- 82"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 83"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 84"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 85"This USB media is incompatible." message appears on the LCD. What does it mean?
- 86"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 87"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 88"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 89"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 90"Transmitting by USB" message appears on the LCD. What does it mean?
- 91"USB media error" message appears on the LCD. What does it mean?
- 92"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 93"This USB media cannot be used." message appears on the LCD. What does it mean?
- 94"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 95"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 96"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 97"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 98"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 99"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 100"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?