FAQs & Troubleshooting
![]() |
Popular |
98 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2How to use the Round frame (PRPRFK1) [Video instructions]
- 3How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 4How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 5Replacing the hook of the automatic needlethreading mechanism [Video instructions]
- 6How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 7How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 8Colors of Tajima (.dst) embroidery data
- 9Color thread table
- 10How to set up the cap frame. [Video instructions]
- 11Maintenance (Clean the hook)
- 12The thread tension is incorrect.
- 13Loops appear on the surface of the fabric when embroidering.
- 14How do I use the embroidery sheet ?
- 15"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." message appears on the LCD. What does it mean?
- 16The bobbin thread breaks.
- 17"Wiper error." message appears on the LCD. What does it mean and how do I clear it?
- 18"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 19"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 20"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 21How do I wind the bobbin?
- 22Maintenance (Cleaning the bobbin case)
- 23"Picker error" message appears on the LCD. What does it mean?
- 24Replacing the needle [Video instructions]
- 25How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 26The needle threader cannot be used.
- 27Embroidery pattern does not sew out correctly.
- 28Upper thread tightened up.
- 29"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 30"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 31"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 32"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean and how do I clear it?
- 33How do I attach or remove the embroidery frame ?
- 34How do I embroider on small pieces of fabric ?
- 35Creating Beautiful Embroidery ( Hooping techniques )
- 36How do I adjust the tension of the upper thread ?
- 37How do I adjust the tension of the bobbin thread ?
- 38How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 39How to set up the cap frame driver. [Video instructions]
- 40Maintenance (Oiling the machine)
- 41"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean and how do I clear it?
- 42"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 43Stabilizers (Backing)
- 44Nothing happens, even if the LCD display is pressed.
- 45Bobbin thread does not wind neatly on the bobbin.
- 46There is puckering in the fabric.
- 47There are needle cuts or holes in the garment.
- 48Although the thread is not broken, a broken thread error occurs and the machine stops.
- 49"Trimming sensor error." message appears on the LCD. What does it mean?
- 50"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?