FAQs & Troubleshooting
 |
Popular |
58 Results
- 1When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 2How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 3"Preventive maintenance is recommended" appears on the LCD.
- 4How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 5How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 6How do I clean the race?
- 7"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 8How to use the Multi-purpose Screwdriver.
- 9When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 10"Failed to save file." message appears on the LCD. What does it mean?
- 11How do I remove or attach the Embroidery foot ?
- 12When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 13How do I attach or remove the embroidery frame ?
- 14How do I attach or remove the Embroidery Unit?
- 15"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 16"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 17How do I adjust the clock on the display?
- 18Where do I put the oil in my machine?
- 19"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 20"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 21"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 22"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 23Fabrics and stabilizer material for embroidery
- 24If the thread breaks during sewing.
- 25"This file cannot be used." message appears on the LCD. What does it mean?
- 26"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 27How do I change the needle ?
- 28"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 29"This USB media is incompatible." message appears on the LCD. What does it mean?
- 30"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 31Upper threading (Point)
- 32"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 33"Set the clock." message appears on the LCD. What does it mean?
- 34"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 35"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 36How do I change the volume of operation sounds or alarm sounds?
- 37How do I thread my machine ?
- 38How do I set the bobbin ?
- 39How do I wind the bobbin?
- 40How do I create a space between characters?
- 41"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 42"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 43"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 44"Transmitting by USB" message appears on the LCD. What does it mean?
- 45"USB media error" message appears on the LCD. What does it mean?
- 46"This USB media cannot be used." message appears on the LCD. What does it mean?
- 47"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 48"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 49"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 50"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
