FAQs & Troubleshooting
Popular |
33 Results
- 1Threading the upper looper
- 2How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 3How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 4How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 5How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 6How to remove and install the needle
- 7Needle
- 8To secure chains
- 9How to set the thread change assembly (Two-thread sewing)
- 10Stitches are not uniform
- 11Adjusting the thread tension dials
- 12How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 13Differential feed adjustment
- 14Using the wide table
- 15Sewing Materials, Threads and Needles Comparison Chart
- 16Threads break
- 17The fabric does not feed through.
- 18Threading the left needle
- 19Threading the lower looper
- 20THREADING
- 21Adjusting the presser foot pressure
- 22How to attach and remove the presser foot
- 23Cleaning
- 24If threads break during sewing
- 25Retracting knife
- 26Free-arm sewing (removing bed extension)
- 27Fabric is puckered
- 28Skipped stitches
- 29Threading the right needle
- 30Preparation before threading
- 31How to use the thread spool cap
- 32Oiling
- 33Needles break