Can I program my Brother machine to forward the faxes I receive to another location?

Why does my machine's LCD show "NO CARTRIDGE" even though I have already installed the ink cartridge?

When I print, the pages are smudged with ink.  What should I do?

What is Distinctive Ring and how do I program it?

The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).

The keys on the control panel do not respond.

I can receive a fax, but cannot receive a telephone call.

Verify if the Brother machine has a dial tone

I am using Voice Over Internet Protocol (VoIP) and cannot send and/or receive faxes. What can I do?

Can third party ink be used to refill the ink cartridges?

How do I clear the message "PAPER JAM" or "PRINTER JAM" from the display?

How do I store received faxes into memory? (Fax Storage)

Can I confirm that the FAX was sent correctly?

Can I still receive faxes or calls when the machine is switched off?

Can I print from or scan to Android™ Smartphone?

My machine does regular cleaning cycles in the night. How can I correct this?

Set up an answering machine (TAD) to work on the same line as the Brother machine.

Set the date and time

How do I clean the Scanner to improve the copy or fax quality?

How do I replace the Ink Cartridge?

Why are the faxes I send always received with a black vertical line down the page?

When scanning a document to be copied or faxed, the message "OUT OF MEMORY" appears on the display. What can I do?

The LCD message "Standing by ON/OFF to resume " is displayed on my Brother machine.

Do I need a telephone line to send and receive faxes with my Brother machine?

Can I print from and scan to iPhone, iPod touch and iPad?

Why doesn't my Brother machine have a dial tone?

How do I adjust the settings of the ring volume, beeper volume and speaker volume on my Brother machine?

I cannot pull the paper tray out of my machine. What can I do?

How do I clear the message "Wrong Paper Size" from the display?

Can I use voice mail on the same line as my Brother machine?

The monochrome copies I make are too light. What can I do?

Why is it necessary for my machine to go through regular cleaning cycles?

How do I clear the message "INK EMPTY BLACK" from the display?

I replaced my ink cartridge, but the LCD is still displaying "Ink Empty Black". What can I do?

Where can I find my Brother machine's serial number?

Improve poor print quality.

What does "NG" or "ERROR" on the Transmission Verification Report mean?

When receiving a single page fax, why does the fax print on two pages or a blank sheet ejects afterwards?

Can I reduce the size of a received fax to fit the size of the paper in the Brother machine?

How do I clear the message "Awaiting Redial"?

The LCD displays an error code (number). What does it mean?

What does "COMM.ERROR" on the LCD display mean?

What is the "Station ID" and how do I set it?