FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 51How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 52How do I resume embroidering after turning off the machine ?
- 53Maintenance (Cleaning around the needle plate)
- 54"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 55"Needle threader error." message appears on the LCD. What does it mean and how do I clear it?
- 56When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 57Although the thread is not broken, a broken thread error occurs and the machine stops.
- 58The upper thread does not reach the bobbin thread when embroidering begins.
- 59The machine is noisy while embroidering.
- 60Loops appear on the surface of the fabric when embroidering.
- 61"Wiper error." message appears on the LCD. What does it mean and how do I clear it?
- 62"This USB media cannot be used." message appears on the LCD. What does it mean?
- 63"This pattern cannot combine." message appears on the LCD. What does it mean?
- 64"This pattern cannot be used." message appears on the LCD. What does it mean?
- 65"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 66"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 67"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 68"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 69"OK to cancel embroidering?" message appears on the LCD. What does it mean and how do I clear it?
- 70"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 71"Check upper and bobbin thread." message appears on the LCD. What does it mean and how do I clear it?
- 72How do I attach or remove the embroidery frame ?
- 73How do I use the embroidery sheet ?
- 74Creating Beautiful Embroidery (Threads)
- 75How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 76How do I thread the machine? (Threading the upper thread)
- 77"Preventive maintenance is recommended" appears on the LCD.
- 78Bobbin thread does not wind neatly on the bobbin.
- 79Upper thread tightened up.
- 80"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 81How do I adjust the tension of the upper thread ?
- 82How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 83How do I install the bobbin wound with thread?
- 84Fabric/stabilizer compatibility chart
- 85The needle threader cannot be used.
- 86LED pointer does not indicate the position correctly.
- 87"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 88"Can not recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean and how do I clear it?
- 89How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 90Maintenance (Oiling the machine)
- 91Maintenance (Cleaning the bobbin case)
- 92Maintenance (Clean the hook)
- 93"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean and how do I clear it?
- 94Why does the upper thread keep breaking?