FAQs & Troubleshooting
![]() |
Popular |
132 Results
- 51"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 52"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 53Colors of Tajima (.dst) embroidery data
- 54How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 55Maintenance (Cleaning around the needle plate)
- 56"Picker error" message appears on the LCD. What does it mean?
- 57"Stop while needle bar case transferring." message appears on the LCD. What does it mean?
- 58Why does the upper thread keep breaking?
- 59Why does the needle keep breaking?
- 60When thread got tangled
- 61How do I thread the machine? (Threading the upper thread)
- 62How do I install the bobbin wound with thread?
- 63"Transmitting by USB" message appears on the LCD. What does it mean?
- 64"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 65"Go to Embroidering Screen and press the unlock key." message appears on the LCD. What does it mean?
- 66"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 67Nothing happens, even if the LCD display is pressed.
- 68There are needle cuts or holes in the garment.
- 69"Trimming sensor error." message appears on the LCD. What does it mean?
- 70"This USB media cannot be used." message appears on the LCD. What does it mean?
- 71"This pattern cannot combine." message appears on the LCD. What does it mean?
- 72"This pattern cannot be used." message appears on the LCD. What does it mean?
- 73"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 74"This file cannot be used." message appears on the LCD. What does it mean?
- 75"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 76"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 77How do I embroider on small pieces of fabric ?
- 78How do I embroider on large pieces of fabric or heavy clothing ?
- 79How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 80How do I adjust the tension of the upper thread ?
- 81How do I resume embroidering after turning off the machine ?
- 82How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 83What is Wiper ?
- 84How do I wind the bobbin?
- 85Maintenance (Oiling the machine)
- 86Maintenance (Cleaning the bobbin case)
- 87"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." message appears on the LCD. What does it mean?
- 88"Needle threader is in threading position." message appears on the LCD. What does it mean?
- 89"Needle case motor has been locked." message appears on the LCD. What does it mean?
- 90Stabilizers (Backing)
- 91"USB media error" message appears on the LCD. What does it mean?
- 92"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 93"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 94How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 95How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 96How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 97How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 98"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 99"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 100"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?