MFC-9140CDN
![]() |
FAQs & Troubleshooting |
43 Results
Sort by:
- 104/12/2023Toner Low
- 219/12/2022I just replaced the toner cartridge and the LCD continues to display the message "Toner Life End" or "Replace Toner".
- 312/07/2022I keep getting the error message "Authenticate Err (Authentication error)".
- 430/09/2021I still receive the error message "Replace DrumX" or "Drum End SoonX" after I replace the drum unit with a new one.
- 510/07/2019Replace Drum
- 612/12/2018Cover is Open
- 729/06/2018Short Paper
- 829/06/2018No Belt Unit
- 929/06/2018No Waste Toner
- 1024/02/2017Calibrate or Calibration Failed or Calibration.
- 1125/03/2016Scan Unable xx
- 1222/06/2015Cartridge Error
- 1319/09/2014No Tray
- 1419/09/2014Print Unable XX
- 1519/09/2014Replace Fuser
- 1616/09/2014Registration or Registration failed.
- 1701/05/2014Replace PF Kit xx
- 1820/02/2014Toner Error
- 1921/11/2013Fuser Error or Self-Diagnostic
- 2027/03/2013When I send a fax from the machine, an error "not register." or "not registered." is displayed.
- 2112/03/2013Manual Feed
- 2227/02/2013Size mismatch
- 2314/02/2013Jam Manual Feed
- 2414/02/20132-sided Disabled
- 2514/02/2013No Toner
- 2614/02/2013No Paper
- 2714/02/2013Document Jam
- 2814/02/2013Out of Memory
- 2914/02/2013Replace Belt
- 3029/01/2013Size Error DX or Size Error 2-sided
- 3129/01/2013Replace WT (waste toner) Box
- 3229/01/2013Jam 2-sided
- 3329/01/2013Jam Rear
- 3429/01/2013Jam Inside
- 3529/01/2013Jam Tray 1 or Jam Tray
- 3629/01/2013Replace Toner
- 3712/11/2012Log Access Error
- 3812/11/2012Drums End Soon/ Drum End Soon(X)
- 3902/11/2012Drum Error (Drum!)
- 4025/10/2012Small Paper
- 4106/07/2010Belt End Soon
- 4206/07/2010WT Box End Soon
- 4306/07/2010Drum Stop