FAQs & Troubleshooting
![]() |
Popular |
98 Results
- 1What is DST ?
- 2Replacing the hook of the automatic needlethreading mechanism [Video instructions]
- 3How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 4How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 5Color thread table
- 6Tutorial videos on how to use the machine [Video instructions]
- 7The thread tension is incorrect.
- 8Bobbin thread does not wind neatly on the bobbin.
- 9Creating Beautiful Embroidery ( Hooping techniques )
- 10The bobbin thread breaks.
- 11Fabric/stabilizer compatibility chart
- 12Embroidery pattern does not sew out correctly.
- 13How do I use the embroidery sheet ?
- 14Colors of Tajima (.dst) embroidery data
- 15Maintenance (Clean the hook)
- 16The upper thread does not reach the bobbin thread when embroidering begins.
- 17How to use the Round frame (PRPRFK1) [Video instructions]
- 18There is puckering in the fabric.
- 19Loops appear on the surface of the fabric when embroidering.
- 20How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 21How do I wind the bobbin?
- 22How to set up the cap frame. [Video instructions]
- 23Why does the upper thread keep breaking?
- 24Stabilizers (Backing)
- 25The needle threader cannot be used.
- 26"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 27How do I embroider on large pieces of fabric or heavy clothing ?
- 28How do I adjust the tension of the bobbin thread ?
- 29How do I resume embroidering after turning off the machine ?
- 30Maintenance (Cleaning the bobbin case)
- 31Maintenance (Cleaning around the needle plate)
- 32Why does the needle keep breaking?
- 33When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 34Stitches are skipped.
- 35LED pointer does not indicate the position correctly.
- 36"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 37"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 38"Not enough available memory to save." message appears on the LCD. What does it mean?
- 39How do I change the needle?
- 40Creating Beautiful Embroidery (Threads)
- 41How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 42What is Wiper ?
- 43"Picker error" message appears on the LCD. What does it mean?
- 44Nothing happens, even if the LCD display is pressed.
- 45Upper thread tightened up.
- 46There are needle cuts or holes in the garment.
- 47Although the thread is not broken, a broken thread error occurs and the machine stops.
- 48"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 49"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 50Maintenance (Oiling the machine)