How to use the Multi-purpose Screwdriver. [ Position “2” ]

Though touching "OK" on "Attach vertical stitch alignment foot and edge sewing sheet" window, the same window still appears.  

How to use the Multi-purpose Screwdriver.

How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]

How to use the Multi-purpose Screwdriver. [ Position “3” ]

How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]

How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]

How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]

How do I create a space between characters?

How do I clean the race?

Combination of fabric, thread and needle

"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?

Fabric and Thread

How to use the Couching foot. (Optional accessory : SA199 / F072, SA199V / F073) [Video instructions]

How do I attach the walking foot ?

How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]

How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]

How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]

How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]

The machine stops and displays error message "Fabric edge is not recognized at this point" while edge sewing though the stitching is not reaching near the edge of the fabric.

Sewing is started even though the presser foot is raised.

The stitch patterns cannot be selected.

How do I recall a specific embroidery pattern from the computer?

"Lower the buttonhole lever." message appears on the LCD. What does it mean?

How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?

Why does the upper thread keep breaking?

"Preventive maintenance is recommended" appears on the LCD.

"Use the presser foot lifter button to raise the presser foot." message appears on the LCD. What does it mean?

"OK to delete the selected pattern?" message appears on the LCD. What does it mean?

"Failed to save file." message appears on the LCD. What does it mean?

I've run out of pre-packaged Embroidery positioning stickers. How can I get extra stickers?

Which pattern can be used in the Edge Sewing function?

With free-motion quilting, skipped stitches or needle breakage occur

"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?

"OK to move the embroidery carriage to its original position?" message appears on the LCD. What does it mean?

"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?

"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?

"Raise the buttonhole lever." message appears on the LCD. What does it mean?

Why does my thread keep jamming?

The thread tension is incorrect.

Why is the outline sewing off the pattern?

Why does the needle keep breaking?

How do I sew buttonholes?

How do I sew an applique?

How do I sew hook-and-loop fasteners(hook-and-loop tapes)?

How do I sew such as vinyl, leather, quilting layers and velvet?

Upper threading (Point)

The bobbin thread cannot be pulled up.

The machine does not make stitches