FAQs & Troubleshooting
Popular |
139 Results
- 1How do I recall a specific embroidery pattern from the computer?
- 2How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 3How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 4When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 5When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 6How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 7How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 8When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 9Combination of fabric, thread and needle
- 10How can I speed the transfer rate up to retrieve embroidery patterns from the USB flash drive?
- 11"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 12How to use the Multi-purpose Screwdriver.
- 13How do I save often-used patterns in the machine's memory?
- 14"The needle is down. Press the needle position button to raise the needle." message appears on the LCD. What does it mean?
- 15How do I correctly install a bobbin?
- 16How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 17How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 18The stitch patterns cannot be selected.
- 19How do I clean the race?
- 20How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 21How do I thread my machine using the Automatic Threading Button?
- 22"Turn off the power and replace the needle plate." message appearing on the LCD. What does it mean and how do I clear it?
- 23Fabric and Thread
- 24How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 25How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 26How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 27For better results when sewing stretch fabrics
- 28How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 29How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 30How do I manually thread my machine?
- 31It is difficult to pass the thread through the needle bar thread guide(hook).
- 32"USB media is not loaded. Load USB media." message appearing on the LCD. What does it mean and how do I clear it?
- 33"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean?
- 34"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean and how do I clear it?
- 35"Change to the large, or extra large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 36"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 37How do I remove the presser foot holder?
- 38How do I confirm Windows98SE?
- 39Embroidery
- 40"Cannot embroider since the embroidery unit is not attached. Turn off the machine, and then attach the embroidery unit." message appears on the LCD. What does it mean?
- 41"Attach the embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 42"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 43How do I raise or lower the feed dogs?
- 44How do I select patterns from the embroidery cards (sold separately)?
- 45The thread tension is incorrect.
- 46How do I sew such as vinyl, leather, quilting layers and velvet?
- 47How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 48How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 49"Use the presser foot lifter button to raise the presser foot." message appears on the LCD. What does it mean?
- 50How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]