FAQs & Troubleshooting
![]() |
Popular |
39 Results
- 1I slide the stitch width adjustment slider, but I can not adjust the stitch width (zigzag width).
- 2Fabric and Thread
- 3Where do I put the oil in my machine?
- 4I slide the stitch length adjustment slider, but I can not adjust the stitch length.
- 5Place a spool of thread on a spool pin.
- 6An "E5" message appears on the panel.
- 7How do I load the spool into the thread cassette?
- 8It is difficult to pass the thread through the needle bar thread guide(hook).
- 9"E7" message appearing on the stitch indicator. What does it mean and how do I clear it?
- 10An "E1" message appears on the panel.
- 11Why does my thread keep jamming?
- 12Combination of fabric, thread and needle
- 13When thread got tangled.
- 14Incorrect thread tension
- 15An "E3" message appears on the panel.
- 16The thread tension is incorrect.
- 17Upper Threading (Using the twin needle)
- 18How do I manually thread the needle?
- 19When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 20How do I remove the presser foot holder?
- 21"E8" message appearing on the stitch indicator. What does it mean and how do I clear it?
- 22An "E2" message appears on the panel.
- 23How do I sew an applique?
- 24How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 25How do I sew a blind hem?
- 26How do I thread the needle?
- 27Why does the upper thread keep breaking?
- 28Why does the needle keep breaking?
- 29How do I sew buttonholes?
- 30How do I sew such as vinyl, leather, quilting layers and velvet?
- 31How do I wind the bobbin?
- 32The thread is looping when I try to wind a bobbin.
- 33My auto threader is not working. What should I do?
- 34How do I correctly install a bobbin?
- 35When should I use the extra spool pin?
- 36How to I attach the spool of thread to my machine?
- 37An "E6" message appears on the panel.
- 38An "E4" message appears on the panel.
- 39Why does the lower thread keep breaking?