FAQs & Troubleshooting
Popular |
33 Results
- 1How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 2How to remove and install the needle
- 3Stitches are not uniform
- 4Skipped stitches
- 5Threading the left needle
- 6How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 7How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 8How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 9Using the wide table
- 10Threading the upper looper
- 11Preparation before threading
- 12Adjusting the presser foot pressure
- 13How to set the thread change assembly (Two-thread sewing)
- 14Differential feed adjustment
- 15If threads break during sewing
- 16Free-arm sewing (removing bed extension)
- 17Threads break
- 18Needles break
- 19The fabric does not feed through.
- 20Threading the right needle
- 21Threading the lower looper
- 22THREADING
- 23Adjusting the thread tension dials
- 24How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 25How to attach and remove the presser foot
- 26Needle
- 27Oiling
- 28Cleaning
- 29To secure chains
- 30Retracting knife
- 31Sewing Materials, Threads and Needles Comparison Chart
- 32Fabric is puckered
- 33How to use the thread spool cap