Innov-is A150
FAQs & Troubleshooting |
20 Results
Sort by
- 102/17/2022"Change the speed controller mode to "OFF"." message appears on the LCD.
- 207/19/2018"Change to the single needle mode, and replace the needle." appears on the LCD.
- 307/19/2018"The safety device has been activated." appears on the LCD.
- 407/18/2018"F10" appears on the LCD. What does it mean?
- 507/18/2018"F09" appears on the LCD. What does it mean?
- 607/18/2018"F08" appears on the LCD. What does it mean?
- 707/18/2018"OK to cancel the current pattern selection?" message appears on the LCD. What does it mean?
- 807/18/2018"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 907/18/2018"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 1007/18/2018"No more stitches can be combined." message appears on the LCD. What does it mean?
- 1107/18/2018"Lift the buttonhole lever." appears on the LCD.
- 1207/18/2018"Disconnect the foot controller." message appears on the LCD.
- 1307/18/2018"Return the bobbin winding shaft to left." message appears on the LCD. What does it mean?
- 1402/21/2018"F07" appears on the LCD. What does it mean?
- 1502/21/2018"F06" appears on the LCD. What does it mean?
- 1602/21/2018"F05" appears on the LCD. What does it mean?
- 1702/21/2018"F04" appears on the LCD. What does it mean?
- 1802/21/2018"F03" appears on the LCD. What does it mean?
- 1902/21/2018"F02" appears on the LCD. What does it mean?
- 2002/21/2018"F01" appears on the LCD. What does it mean?