TJ-4420TN
 |
Întrebări frecvente şi depanare |
20 Rezultate
Sortare după
- 113/12/2021How to adjust the cut position (For Windows)
- 213/12/2021How to set the Direct Thermal or Thermal Transfer Print Methods
- 329/01/2021How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
- 429/01/2021How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
- 528/09/2020Printing the printer configuration (Self-test)
- 628/09/2020The print quality is poor.
- 728/09/2020The left or right side of the label is not printed correctly.
- 828/09/2020The printed label is wrinkled.
- 928/09/2020How to skip the AUTO.BAS program only one time by directly operating the printer
- 1028/09/2020How to execute the printer configuration (Self-test) to debug
- 1128/09/2020How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
- 1228/09/2020How to calibrate the Gap/Black Mark Sensor by directly operating the printer
- 1320/02/2020When printing with the thermal transfer method, the print or cutting position gradually shifts.
- 1419/02/2020Printing is not possible.
- 1513/03/2019The printing position of small label is incorrect.
- 1613/03/2019How to change the speed and density in BarTender
- 1713/03/2019How to change the printer code page
- 1813/03/2019How to adjust the tear position in BarTender
- 1913/03/2019How to adjust the printout position
- 2013/03/2019How to add a new stock from the Seagull driver
