FAQs & Troubleshooting
 |
Popular |
99 Results
- 1Basic technique for sewing
- 2How do I retrieve a stitch pattern saved in the machine's memory?
- 3The bobbin thread cannot be pulled up.
- 4It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 5How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 6Where do I put the oil in my machine?
- 7How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 8Tips for sewing thick fabrics
- 9Winding and Installing the Bobbin [Video instructions]
- 10Upper threading [Video instructions]
- 11How to adjust the thread tension
- 12How to change the needle stop position
- 13Tips for sewing leathers or vinyl fabrics.
- 14Needle breaks.
- 15Bobbin thread breaks
- 16How to use the memory function to save stitch pattern combinations of decorative stitches
- 17Basic procedure to sew stitches
- 18How to use the foot controller with the machine
- 19Various sewing and application [Video instructions]
- 20How do I adjust the sensitivity of the operation keys?
- 21When the thread became tangled under the bobbin winder seat
- 22How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 23How do I clean the race?
- 24Tips for sewing thin fabrics
- 25Tips for sewing an even seam allowance
- 26"F07" appears on the LCD. What does it mean?
- 27"F06" appears on the LCD. What does it mean?
- 28"F03" appears on the LCD. What does it mean?
- 29"F02" appears on the LCD. What does it mean?
- 30"F01" appears on the LCD. What does it mean?
- 31"OK to cancel the current pattern selection?" message appears on the LCD. What does it mean?
- 32For better results when sewing stretch fabrics
- 33"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 34"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 35"Disconnect the foot controller." message appears on the LCD.
- 36"Return the bobbin winding shaft to left." message appears on the LCD. What does it mean?
- 37"The safety device has been activated." appears on the LCD.
- 38How to select a stitch pattern
- 39Outline of viewing the LCD Screen
- 40How to use the Binding Buttonhole Foot 2. (Optional accessory : SA111 / F084) [Video instructions]
- 41Upper thread breaks.
- 42The machine does not make stitches
- 43How do I adjust a stitch width or length?
- 44How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 45How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 46"F10" appears on the LCD. What does it mean?
- 47Fabric is caught in the machine and cannot be removed
- 48Incorrect thread tension
- 49How do I change the needle ?
- 50"No more stitches can be combined." message appears on the LCD. What does it mean?
