FAQs & Troubleshooting
Popular |
94 Results
- 51"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 52"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 53"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
- 54"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?
- 55"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 56"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 57"This USB media cannot be used." message appears on the LCD. What does it mean?
- 58"This pattern cannot be used." message appears on the LCD. What does it mean?
- 59"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 60"This file cannot be used." message appears on the LCD. What does it mean?
- 61"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 62"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 63"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 64"OK to cancel embroidering?" message appears on the LCD. What does it mean?
- 65"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 66"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 67"Check upper and bobbin thread." message appears on the LCD. What does it mean?
- 68"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 69"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 70Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 71How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 72How to set up the cap frame driver. [Video instructions]
- 73How to Embroider on Shoes. [Video instructions]
- 74"OK to delete the selected picture?" message appears on the LCD. What does it mean?
- 75Maintenance (Oiling the machine)
- 76Maintenance (Cleaning the bobbin case)
- 77Maintenance (Cleaning around the needle plate)
- 78Maintenance (Clean the hook)
- 79How do I create a space between characters?
- 80"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean?
- 81"Needle threader is in threading position." message appears on the LCD. What does it mean?
- 82"Picker error" message appears on the LCD. What does it mean?
- 83"Needle case motor has been locked." message appears on the LCD. What does it mean?
- 84"Needle bar case position error" message appears on the LCD. What does it mean?
- 85How do I thread the machine? (Threading the upper thread)
- 86Fabric/stabilizer compatibility chart
- 87Hooping the Fabric
- 88Embroidery
- 89Fabric and Thread
- 90"Transmitting by USB" message appears on the LCD. What does it mean?
- 91"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 92"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 93"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?
- 94"Preventive maintenance is recommended" message appears on the LCD. What does it mean?