FAQs & Troubleshooting
Popular |
67 Results
- 1How to use the Multi-purpose Screwdriver.
- 2How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 3Embroidery
- 4How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 5When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 6How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 7"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?
- 8How do I remove or attach the Embroidery foot ?
- 9How do I wind the bobbin?
- 10"Preventive maintenance is recommended" appears on the LCD.
- 11How do I thread my machine ?
- 12"This USB media is incompatible." message appears on the LCD. What does it mean?
- 13When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 14How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 15"Set the clock." message appears on the LCD. What does it mean?
- 16Where do I put the oil in my machine?
- 17"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 18How do I clean the race?
- 19Fabrics and stabilizer material for embroidery
- 20"Sensor module error." message appears on the LCD. What does it mean?
- 21How do I attach or remove the embroidery frame ?
- 22How do I attach or remove the Embroidery Unit?
- 23How do I set the bobbin ?
- 24How do I create a space between characters?
- 25"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 26"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 27"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 28"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 29"The pattern field extends out of the pattern area, repeat setting the position and angle using the sensor pen." message appears on the LCD. What does it mean?
- 30"OK to reset the pattern’s border setting, position and/or angle?" message appears on the LCD. What does it mean?
- 31"Failed to save file." message appears on the LCD. What does it mean?
- 32How do I change the volume of operation sounds or alarm sounds?
- 33"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 34When thread got tangled.
- 35How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
- 36If the thread breaks during sewing.
- 37"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 38"This file cannot be used." message appears on the LCD. What does it mean?
- 39"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 40"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 41How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
- 42How do I change the needle ?
- 43"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 44"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 45"Transmitting by USB" message appears on the LCD. What does it mean?
- 46"USB media error" message appears on the LCD. What does it mean?
- 47"This USB media cannot be used." message appears on the LCD. What does it mean?
- 48"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 49"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 50"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?