FAQs & Troubleshooting
Popular |
71 Results
- 1How to set up the cap frame. [Video instructions]
- 2How to set up the cap frame driver. [Video instructions]
- 3Why won't the tension set on my sewing machine?
- 4How do I thread my machine (Threading the upper thread). [Video instructions]
- 5How do I thread the needle. [Video instructions]
- 6"Preventive maintenance is recommended" appears on the LCD.
- 7"Floppy disk erase error." message appearing on the LCD. What does it mean and how do I clear it?
- 8Hooping the Fabric
- 9How do I create a space between characters?
- 10When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 11There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 12"Floppy disk write protect." message appearing on the LCD. What does it mean and how do I clear it?
- 13"Floppy disk read error." message appearing on the LCD. What does it mean and how do I clear it?
- 14How do I thread the machine? (Threading the upper thread)
- 15How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 16"Impossible to reserve this needle." message appearing on the LCD. What does it mean and how do I clear it?
- 17"Pattern is too large." message appearing on the LCD. What does it mean and how do I clear it?
- 18"No CompactFlash card." message appearing on the LCD. What does it mean and how do I clear it?
- 19Why does the upper thread keep breaking?
- 20Embroidery
- 21Fabric and Thread
- 22"USB read error." message appearing on the LCD. What does it mean and how do I clear it?
- 23"Needle bar case home position error." message appearing on the LCD. What does it mean and how do I clear it?
- 24Why won't the machine pick up the bobbin thread?
- 25Place a spool of thread on a spool pin
- 26"The thread number is invalid." message appearing on the LCD. What does it mean and how do I clear it?
- 27"Impossible to add any more character." message appearing on the LCD. What does it mean and how do I clear it?
- 28"This pattern contains too much data to be stored." message appearing on the LCD. What does it mean and how do I clear it?
- 29"Pocket read error." message appearing on the LCD. What does it mean and how do I clear it?
- 30"No disk inserted or this disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?
- 31"Check if thread is broken." message appearing on the LCD. What does it mean and how do I clear it?
- 32Why is the outline sewing off the pattern?
- 33Recommendation accessories
- 34Stabilizers (Backing)
- 35How do I confirm Windows98SE?
- 36Maintenance (Oiling the machine)
- 37Maintenance (Cleaning the bobbin case)
- 38"Needle threader is in threading position." message appearing on the LCD. What does it mean and how do I clear it?
- 39"Impossible to set the start & the end points." message appearing on the LCD. What does it mean and how do I clear it?
- 40"This file cannot be used." message appearing on the LCD. What does it mean and how do I clear it?
- 41"Unknown data format." message appearing on the LCD. What does it mean and how do I clear it?
- 42"Change to the big frame." message appearing on the LCD. What does it mean and how do I clear it?
- 43"The selected embroidery pattern exceeds size of the frame." message appearing on the LCD. What does it mean and how do I clear it?
- 44"Characters cannot be aligned." message appearing on the LCD. What does it mean and how do I clear it?
- 45"Maximum number of patterns have been combined." message appearing on the LCD. What does it mean and how do I clear it?
- 46"CompactFlash card read error." message appearing on the LCD. What does it mean and how do I clear it?
- 47"Can not use this card." message appearing on the LCD. What does it mean and how do I clear it?
- 48"Save error." message appearing on the LCD. What does it mean and how do I clear it?
- 49"Can not use this disk." message appearing on the LCD. What does it mean and how do I clear it?
- 50"Check if lower thread is broken." message appearing on the LCD. What does it mean and how do I clear it?