FAQs & Troubleshooting
Popular |
33 Results
- 1Using the wide table
- 2How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 3How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 4Differential feed adjustment
- 5Oiling
- 6The fabric does not feed through.
- 7Preparation before threading
- 8Cleaning
- 9Free-arm sewing (removing bed extension)
- 10Adjusting the thread tension dials
- 11How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 12How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 13How to attach and remove the presser foot
- 14Sewing Materials, Threads and Needles Comparison Chart
- 15Skipped stitches
- 16Threading the left needle
- 17Threading the upper looper
- 18Threading the lower looper
- 19How to set the thread change assembly (Two-thread sewing)
- 20Needle
- 21If threads break during sewing
- 22To secure chains
- 23Retracting knife
- 24Threads break
- 25Needles break
- 26THREADING
- 27How to use the thread spool cap
- 28How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 29Adjusting the presser foot pressure
- 30How to remove and install the needle
- 31Fabric is puckered
- 32Stitches are not uniform
- 33Threading the right needle