FAQs & Troubleshooting
![]() |
Popular |
127 Results
- 51How do I attach or remove the embroidery frame ?
- 52How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 53How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 54How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 55How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 56How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 57How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 58How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 59How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 60How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 61How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 62How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 63How do I wind the bobbin?
- 64"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 65"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 66"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 67"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 68"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 69"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 70"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 71"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 72"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 73"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 74How do I sew buttonholes?
- 75Embroidery
- 76Upper threading (Point)
- 77For better results when sewing stretch fabrics
- 78"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 79"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 80"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
- 81"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?
- 82"OK to delete the setting?" message appears on the LCD. What does it mean?
- 83"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 84How do I attach or remove the Embroidery Unit?
- 85How do I adjust the clock on the display?
- 86How do I attach the walking foot ?
- 87How do I change the needle ?
- 88"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 89"This USB media is incompatible." message appears on the LCD. What does it mean?
- 90"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 91"Transmitting by USB" message appears on the LCD. What does it mean?
- 92"USB media error" message appears on the LCD. What does it mean?
- 93"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 94"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 95"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 96"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 97"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 98The thread tension is incorrect.
- 99Why does the needle keep breaking?
- 100How do I sew an applique?