Innov-is VQ2400
![]() |
FAQs & Troubleshooting |
38 Results
Sort by
- 112/07/2024"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 212/07/2024"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 312/07/2024"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 409/07/2019"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 509/07/2019"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 609/07/2019"Set the clock." message appears on the LCD. What does it mean?
- 709/07/2019"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 809/07/2019"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 909/07/2019"This USB media is incompatible." message appears on the LCD. What does it mean?
- 1009/07/2019"This USB media cannot be used." message appears on the LCD. What does it mean?
- 1109/07/2019"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 1209/07/2019"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 1309/07/2019"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 1409/07/2019"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 1509/07/2019"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 1606/08/2018"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 1702/05/2018"This file cannot be used." message appears on the LCD. What does it mean?
- 1829/07/2016"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 1929/07/2016"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 2029/07/2016"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 2129/07/2016"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 2229/07/2016"OK to delete the setting?" message appears on the LCD. What does it mean?
- 2329/07/2016"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 2429/07/2016"Failed to save file." message appears on the LCD. What does it mean?
- 2529/07/2016"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 2629/07/2016"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 2729/07/2016"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 2829/07/2016"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 2929/07/2016"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 3029/07/2016"Transmitting by USB" message appears on the LCD. What does it mean?
- 3129/07/2016"USB media error" message appears on the LCD. What does it mean?
- 3229/07/2016"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 3329/07/2016"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 3429/07/2016"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 3529/07/2016"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 3629/07/2016"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 3729/07/2016"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 3814/09/2012"Preventive maintenance is recommended" appears on the LCD.