FAQs & Troubleshooting
Popular |
317 Results
- 1Mat and Material Combinations
- 2Downloading Optional Design Pattern Collection
- 3About Blade Extension, Cutting Pressure and Mat
- 4Mat and Cutting Blade Combinations
- 5Can I create the cutting data for ScanNCut from the image data?
- 6The mat is fed in at an angle and is not fed during cutting / drawing.
- 7Adjusting the Blade Extension
- 8List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 9If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 10How to register Your Machine with CanvasWorkspace
- 11ErrS10 appears on the computer screen.
- 12E10007 appears on the computer screen.
- 13List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 14How do I Scan for Cutting (Direct Cut) ?
- 15ErrS03 appears on the computer screen.
- 16E10006 appears on the computer screen.
- 17"Cannot operate when there is no pattern." message appearing on the LCD. What does it mean?
- 18Loading and Unloading the Mat
- 19Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 20E11010 appears on the computer screen.
- 21List of Error Messages for CanvasWorkspace (Others)
- 22An error appears when trying to import a DXF file.
- 23How to create an account for CanvasWorkspace
- 24What should I do if the initial setting (position adjustment) for region embossing failed?
- 25How can I transfer the created/edited data between CanvasWorkspace and my machine via a wireless network?
- 26The machine is turned off (Auto Shut Down).
- 27Replacing the Blade
- 28The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 29E10001 appears on the computer screen.
- 30Embossing Function Activation [Video]
- 31What should I do if the desired network SSID is not displayed when setting up the wireless network using the Setup Wizard?
- 32Settings for Specific Functions
- 33How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 34ErrS25 appears on the computer screen.
- 35ErrS24 appears on the computer screen.
- 36ErrS04 appears on the computer screen.
- 37E02006 appears on the computer screen.
- 38E02005 appears on the computer screen.
- 39How to Use the Enhanced Image Tracing on CanvasWorkspace for PC [Video]
- 40How to Use the Printable Sticker Function on CanvasWorkspace for PC [Video]
- 41How to Use the Rhinestone Function on CanvasWorkspace for PC [Video]
- 42N12001 appears on the computer screen.
- 43E11008 appears on the computer screen.
- 4424inch Scanning Function [Video]
- 45What should I do if the scanned and embossed region positions are misaligned?
- 46What should I do if the scanned and cut positions are misaligned?
- 47How do I perform trial cutting? (Test Cut)
- 48How do I recall a saved data from the machine's memory or USB flash drive?
- 49How to attach the material to the mat
- 50How do I Create the Cutting Data (Scan to Cut Data) ?