FAQs & Troubleshooting
![]() |
Popular |
102 Results
- 1How do I adjust thread tension for embroidering?
- 2The embroidery design cannot be imported to the design page on PE-DESIGN 11 from the embroidery machine via the wireless network.
- 3How do I hoop the fabric in the embroidery frame?
- 4How do I enter a line feed in the embroidery pattern?
- 5How to change the displayed language
- 6The wireless network connection cannot be set up between the embroidery machine and the computer with PE-DESIGN 11.
- 7How do I retrieve the patterns from the machine’s memory?
- 8"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 9There is no machine that can be transferred
- 10"F**" appears on the LCD. What does it mean?
- 11"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 12How to unsubscribe from Artspira
- 13How to disconnect a machine from Artspira using the machine
- 14About the contents and data treated by Artspira app
- 15M4341001 appears on the Artspira app screen.
- 16The embroidery design data cannot be transferred from PE-DESIGN 11 to the embroidery machine via the wireless network.
- 17How to set up the wireless network connection with the wizard on the machine
- 18How do I edit a single letter in the embroidery pattern?
- 19"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
- 20Where do I put the oil in my machine?
- 21"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 22"This USB media cannot be used." message appears on the LCD. What does it mean?
- 23"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 24"Preventive maintenance is recommended." message appears on the LCD. What does it mean?
- 25E92001 appears on the Artspira app screen.
- 26After selecting data, "Downloading" is displayed and the screen does not change to the next screen
- 27How to obtain and input PIN of machine
- 28How to update your machine software by downloading the update file directly to your machine using a wireless network
- 29When the thread became tangled under the bobbin winder seat
- 30How do I attach or remove the embroidery frame ?
- 31How do I remove or attach the Embroidery foot ?
- 32How do I thread the machine (Threading the upper thread)?
- 33How do I wind the bobbin?
- 34Data cannot be saved to the machine
- 35Introducing the Brother Artspira application
- 36List of Error Messages for Artspira app (Mxxxxxxx/Exxxxx)
- 37Upper thread breaks.
- 38Fabric puckers
- 39How do I save the embroidery patterns in the machine’s memory?
- 40How do I remove or attach the presser foot ?
- 41How do I set the bobbin ?
- 42"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean and how do I clear it?
- 43How do I clean the race?
- 44How to connect your machine and transfer data to Artspira
- 45M5541001 appears on the Artspira app screen.
- 46M4452001 appears on the Artspira app screen.
- 47M2102501 appears on the Artspira app screen.
- 48"The wireless setting is not activated." message appears on the LCD. What does it mean?
- 49"The machine is still trying to connect to your wireless network." message appears on the LCD. What does it mean?
- 50Needle breaks.