FAQs & Troubleshooting
Popular |
36 Results
- 1Where do I put the oil in my machine?
- 2Embroidery
- 3Place a spool of thread on a spool pin.
- 4Why does the lower thread keep breaking?
- 5How do I clean the race?
- 6When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 7Fabrics and stabilizer material for embroidery
- 8"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 9F** or "F*" appears on the LCD. What does it mean?
- 10It is difficult to pass the thread through the needle bar thread guide(hook).
- 11How do I retrieve a specific embroidery pattern from the computer?
- 12"Turn off the machine, and attach the embroidery unit." message appearing on the LCD.What does it mean?
- 13Upper threading (Point)
- 14"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 15"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 16"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 17"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 18"The safety device has been activated." appears on the LCD.
- 19Why is the outline sewing off the pattern?
- 20When thread got tangled.
- 21How do I correctly install a bobbin?
- 22How do I save often-used patterns in the machine's memory?
- 23"Lower the presser foot lever." appears on the LCD.
- 24"Deleting..." message appearing on the LCD. What does it mean?
- 25"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 26"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 27"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 28"Saving..." message appearing on the LCD. What does it mean?
- 29"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 30"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 31"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 32"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 33"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 34"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 35How do I confirm Windows98SE?
- 36How do I select patterns from the embroidery cards (sold separately)?