FAQs & Troubleshooting
Popular |
231 Results
- 1Setup a Brother machine on a wireless (Wi-Fi) network.
- 2(Video) Replace the Toner Cartridge
- 3Update your machine's firmware using Brother iPrint&Scan (Android/iOS)
- 4The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device).
- 5Replace the Drum Unit
- 6Print on Both Sides of the Paper Automatically (Automatic 2-sided Printing)
- 7I cannot connect to the printer via Wi-Fi Direct using the Brother Print Service Plugin (Android™ 12 or later).
- 8(Video) Set up your Brother machine
- 9What is Brother iPrint&Scan?
- 10(Video) Update the Driver or Firmware for your Brother machine
- 11Reset the Drum Counter
- 12How to identify your Operating System (OS).
- 13What is the default password for my Brother network card, BRAdmin, Remote Setup or Web Based Management?
- 14Paper is Jammed in the Manual Feed Slot
- 15Load and Print Paper in the Manual Feed Slot
- 16Cover is Open
- 17My Brother machine could not be found over the network when I installed drivers on my computer.
- 18(Video) Unpack your Brother machine
- 19WT Box End Soon
- 20The printer status is Offline or Paused.
- 21Can I select paper trays from my device (iPhone, iPod touch and iPad) using the Brother iPrint&Scan?
- 22Calibrate or Calibration Failed or Calibration.
- 23Adjust color settings by using the custom setting in the printer driver
- 24Replace the Belt Unit
- 25Paper is Jammed in the Back of the Machine
- 26Manual Feed
- 27Load and Print on Labels in the Manual Feed Slot
- 28I cannot print using my Brother machine on a wireless network (Mac)
- 29Enable the Brother machine's network interface.
- 30Print data from the Clipboard in Brother iPrint&Scan when using an iPhone, iPod touch and iPad.
- 31I just replaced the toner cartridge and the LCD continues to display the message "Toner Life End" or "Replace Toner".
- 32Calibrate Colour Output
- 33Size mismatch
- 34Wrinkled printout
- 35What is the default password for my Brother machine?
- 36Check the remaining ink or toner level (Linux)
- 37Wireless setup is requesting a WPS PIN to complete the setup
- 38I cannot find some options in the Print dialog box. (For OS X v10.7 to 10.15)
- 39Can I print on transparencies e.g. for overhead projectors?
- 40Toner Error
- 41No Belt Unit
- 42Print Unable ##
- 43Print both sides of paper or a booklet automatically
- 44Secure Print (Mac)
- 45Drum !
- 46Print the Network Configuration Report
- 47My printed documents are incomplete or a blue screen appears when printing or using PC-FAX after a Windows 10 update (March 2021)
- 48Print as a Poster (Windows)
- 49I still receive the error message "Replace Drum", "Drum End Soon" or "Drum Stop" after I replace the drum unit with a new one.
- 50I am using Safari in Mac OS X. When I created a CSR or a Self-signed Certificate using the IP address to configure the "Common Name" and I try to access the Print Server using Safari with SSL communication, Safari issues an alert.