FAQs & Troubleshooting
Popular |
94 Results
- 1Color thread table
- 2How do I resume embroidering after turning off the machine ?
- 3Why does the needle keep breaking?
- 4Nothing happens, even if the LCD display is pressed.
- 5"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 6"Press the unlock key to unlock the machine." message appears on the LCD. What does it mean?
- 7"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 8Creating Beautiful Embroidery (Threads)
- 9How to set up the cap frame driver. [Video instructions]
- 10How to Embroider on Pet Collar. [Video instructions]
- 11LED pointer does not indicate the position correctly.
- 12There is puckering in the fabric.
- 13"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 14"Can not recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean and how do I clear it?
- 15How do I embroider on small pieces of fabric ?
- 16How do I embroider on large pieces of fabric or heavy clothing ?
- 17How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 18"Needle threader is in threading position." message appears on the LCD. What does it mean and how do I clear it?
- 19Why does the upper thread keep breaking?
- 20Fabric/stabilizer compatibility chart
- 21The thread tension is incorrect.
- 22How do I attach or remove the embroidery frame ?
- 23How do I use the embroidery sheet ?
- 24Maintenance (Oiling the machine)
- 25Maintenance (Cleaning around the needle plate)
- 26How do I thread the machine? (Threading the upper thread)
- 27Stabilizers (Backing)
- 28Although the thread is not broken, a broken thread error occurs and the machine stops.
- 29The machine is noisy while embroidering.
- 30"Trimming sensor error." message appears on the LCD. What does it mean?
- 31"This USB media is incompatible." message appears on the LCD. What does it mean and how do I clear it?
- 32"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 33"This file cannot be used." message appears on the LCD. What does it mean?
- 34"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 35"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean and how do I clear it?
- 36"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 37"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 38"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 39Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 40How do I change the needle?
- 41How do I adjust the tension of the upper thread ?
- 42How do I adjust the tension of the bobbin thread ?
- 43How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 44Maintenance (Cleaning the thread paths of the upper threads)
- 45"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean and how do I clear it?
- 46"Picker error" message appears on the LCD. What does it mean?
- 47How do I install the bobbin wound with thread?
- 48When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 49How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 50The needle threader cannot be used.