Why does the lower thread keep breaking?

How do I thread my machine?

Combination of fabric, thread and needle

"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean and how do I clear it?

When thread got tangled.

"No disk inserted or this disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?

When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?

Place a spool of thread on a spool pin.

How do I wind the bobbin?

"Lower the presser foot lever." appears on the LCD.

"Not enough available memory to save the pattern. Delete another pattern? Change the floppy disk?" message appearing on the LCD. What does it mean and how do I clear it?

"Saving..." message appearing on the LCD. What does it mean?

"Change to the medium or large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?

"The pattern is too large for the large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?

"The needle is down. Press the needle position button to raise the needle." message appearing on the LCD. What does it mean and how do I clear it?

"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?

"Raise the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?

"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?

How do I raise or lower the feed dogs?

Why does my thread keep jamming?

Why is the outline sewing off the pattern?

How do I sew hook-and-loop fasteners(hook-and-loop tapes)?

How do I sew a blind hem?

Fabrics and stabilizer material for embroidery

How do I correctly install a bobbin?

"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?

Where do I put the oil in my machine?

It is difficult to pass the thread through the needle bar thread guide(hook).

How do I create a space between characters?

"Formatting the floppy disk." message appearing on the LCD. What does it mean?

"There is a pattern included that can not be saved to a floppy disk. Save the pattern in the machine's memory." message appearing on the LCD. What does it mean and how do I clear it?

"Deleting..." message appearing on the LCD. What does it mean?

"There is not much thread remaining in the bobbin." message appearing on the LCD. What does it mean and how do I clear it?

"This disk is write protected. Can not delete the pattern. Disengage the write protection and try to delete again." message appearing on the LCD. What does it mean and how do I clear it?

"This disk is write protected. Can not save the pattern. Disengage the write protection and save again." message appearing on the LCD. What does it mean and how do I clear it?

"Can not read this disk. This disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?

"Can not save to this disk. The disk may be defective. Change the disk and try to save again." message appearing on the LCD. What does it mean and how do I clear it?

"Can not format this disk. This may be the wrong type of disk, or the disk may be defective. Please change the floppy disk." message appearing on the LCD. What does it mean and how do I clear it?

"This disk is not formatted. Do you want to format this disk? Formatting the disk will erase any data currently on the disk." message appearing on the LCD. What does it mean and how do I clear it?

"Change to the large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?

"Select a pattern." message appearing on the LCD. What does it mean and how do I clear it?

"This button does not operate when the embroidery unit is not attached. Turn off the powert and attach the embroidery unit." message appearing on the LCD. What does it mean and how do I clear it?

"This button does not operate when the embroidery unit is attached Turn off the power and remove the embroidery unit." message appearing on the LCD. What does it mean and how do I clear it?

"This embroidery card can not be used. Unusable cards include, cards licensed for sale in other countries, etc." message appearing on the LCD. What does it mean and how do I clear it?

"There is no embroidery card in card slot. Insert an embroidery card." message appearing on the LCD. What does it mean and how do I clear it?

"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?

"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?

"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." message appearing on the LCD. What does it mean and how do I clear it?

"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?