FAQs & Troubleshooting
Popular |
132 Results
- 1Aligning the embroidering position using the built-in camera
- 2Tutorial videos on how to use the machine [Video instructions]
- 3How to Embroider on Shoes. [Video instructions]
- 4How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 5How to Embroider on Clothes. [Video instructions]
- 6Stabilizers (Backing)
- 7Aligning the embroidering position using the embroidery positioning sticker
- 8Maintenance (Cleaning around the needle plate) [ Video ]
- 9How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 10How to use the the versatile magnetic frame [Video instructions]
- 11How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 12Changing the embroidering position and Adjusting the angle
- 13Maximum sewing speed setting
- 14How to Embroider on Bag. [Video instructions]
- 15How to Embroider on Pet Collar. [Video instructions]
- 16Displaying the fabric on the LCD when aligning the embroidering position
- 17How do I set the machine to trim the threads between the characters?
- 18Specifying jumpstitch trimming or DST jump codes for trimming
- 19Temporary needle bar setting
- 20Reserved needle bar and sewing speed settings
- 21"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 22Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 23Maintenance (Cleaning the bobbin case) [ Video ]
- 24"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 25Why does the upper thread keep breaking?
- 26How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 27How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 28How to use the Round frame (PRPRFK1) [Video instructions]
- 29How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 30"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 31"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
- 32The thread tension is incorrect.
- 33Embroidery pattern does not sew out correctly.
- 34The bobbin thread breaks.
- 35Basting Embroidery
- 36"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 37How do I adjust the tension of the upper thread ?
- 38How to Embroider on Cap. [Video instructions]
- 39How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 40How do I install the bobbin wound with thread?
- 41"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 42"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
- 43"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 44Convenience of the manual color sequence
- 45The needle threader cannot be used.
- 46The machine is noisy while embroidering.
- 47How do I resume embroidering after turning off the machine ?
- 48Maintenance (Oiling the machine) [ Video ]
- 49Maintenance (Clean the hook) [ Video ]
- 50"Picker error" message appears on the LCD. What does it mean?