FAQs & Troubleshooting
Popular |
127 Results
- 1How to use the Multi-purpose Screwdriver.
- 2How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 3How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 4Combination of fabric, thread and needle
- 5The machine does not make stitches
- 6How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 7How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 8How do I thread my machine ?
- 9How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 10How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 11Why does the lower thread keep breaking?
- 12When thread got tangled.
- 13How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 14How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 15How do I change the needle ?
- 16How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 17How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 18How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 19"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 20"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 21How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 22If the thread breaks during sewing.
- 23"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
- 24"OK to delete the setting?" message appears on the LCD. What does it mean?
- 25How do I wind the bobbin?
- 26"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 27"USB media error" message appears on the LCD. What does it mean?
- 28"This USB media cannot be used." message appears on the LCD. What does it mean?
- 29"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 30"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 31When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 32How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 33How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 34How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 35How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 36The bobbin thread cannot be pulled up.
- 37How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 38How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
- 39How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 40"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 41How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 42How do I remove or attach the presser foot holder?
- 43How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 44How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 45How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 46For better results when sewing stretch fabrics
- 47"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 48"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 49"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 50"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?