FAQs & Troubleshooting
Popular |
97 Results
- 1Combination of fabric, thread and needle
- 2How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 3How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 4How do I retrieve a specific embroidery pattern from the computer to the machine via a USB media?
- 5How do I remove the presser foot holder?
- 6Why does the lower thread keep breaking?
- 7Fabric and Thread
- 8F** or "F*" appears on the LCD. What does it mean?
- 9For better results when sewing stretch fabrics
- 10How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 11How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 12How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 13How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 14How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 15How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 16How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 17How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 18With free-motion quilting, skipped stitches or needle breakage occur
- 19"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 20"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 21"The safety device has been activated." appears on the LCD.
- 22The thread tension is incorrect.
- 23How do I sew a blind hem?
- 24Upper threading (Point)
- 25Place a spool of thread on a spool pin.
- 26"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 27"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 28Why does the upper thread keep breaking?
- 29Incorrect thread tension
- 30How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 31How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 32How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 33How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 34How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 35How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 36How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 37How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 38Where do I put the oil in my machine?
- 39"Lower the presser foot lever." appears on the LCD.
- 40"Deleting..." message appearing on the LCD. What does it mean?
- 41"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 42"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 43"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 44"Lower the buttonhole lever." appears on the LCD.
- 45"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 46"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 47When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 48When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 49"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 50"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?