FAQs & Troubleshooting
Popular |
33 Results
- 1Threading the upper looper
- 2Using the wide table
- 3How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 4How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 5Adjusting the thread tension dials
- 6How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 7How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 8How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 9Differential feed adjustment
- 10How to set the thread change assembly (Two-thread sewing)
- 11How to remove and install the needle
- 12Stitches are not uniform
- 13How to attach and remove the presser foot
- 14Oiling
- 15If threads break during sewing
- 16Sewing Materials, Threads and Needles Comparison Chart
- 17Fabric is puckered
- 18Skipped stitches
- 19The fabric does not feed through.
- 20Threading the left needle
- 21Threading the right needle
- 22Threading the lower looper
- 23Preparation before threading
- 24Adjusting the presser foot pressure
- 25Needle
- 26Cleaning
- 27To secure chains
- 28Retracting knife
- 29Free-arm sewing (removing bed extension)
- 30Threads break
- 31Needles break
- 32THREADING
- 33How to use the thread spool cap