FAQs & Troubleshooting
![]() |
Popular |
56 Results
- 1How do I wind the bobbin?
- 2How do I hoop the fabric in the embroidery frame?
- 3How do I remove or attach the Embroidery foot ?
- 4Touch panel is malfunctioning.
- 5How do I change the needle ?
- 6Basic operations and embroidery functions [Video instructions]
- 7How do I set the bobbin?
- 8How do I thread the machine (Threading the upper thread)?
- 9Fabric puckers
- 10Stitches are skipped
- 11How do I clean the race?
- 12"USB media error" message appears on the LCD. What does it mean?
- 13How to change the needle stop position
- 14How do I adjust thread tension for embroidering?
- 15"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 16How do I retrieve embroidery patterns saved in the machine's memory or a USB flash drive?
- 17"F05" appears on the LCD. What does it mean?
- 18How do I attach or remove the embroidery frame ?
- 19Upper thread breaks.
- 20"F06" appears on the LCD. What does it mean?
- 21"F02" appears on the LCD. What does it mean?
- 22Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 23How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?
- 24"Not enough available memory to save." message appears on the LCD. What does it mean?
- 25"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 26"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 27"The bobbin thread is almost empty." message appears on the LCD during embroidering and the machine has stopped. What does it mean?
- 28Needle breaks.
- 29Bobbin thread breaks
- 30"F07" appears on the LCD. What does it mean?
- 31"F01" appears on the LCD. What does it mean?
- 32"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 33"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 34"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 35"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 36"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 37"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 38"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 39How to use the memory function to save embroidery patterns
- 40Tips for getting better embroidery results
- 41"F04" appears on the LCD. What does it mean?
- 42"F03" appears on the LCD. What does it mean?
- 43It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 44How do I adjust the sensitivity of the operation keys?
- 45When the thread became tangled under the bobbin winder seat
- 46How do I attach or remove the Embroidery Unit?
- 47Where do I put the oil in my machine?
- 48"This USB media cannot be used." message appears on the LCD. What does it mean?
- 49"Not enough available memory to save the pattern. Delete another pattern?." message appears on the LCD. What does it mean?
- 50"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?