FAQs & Troubleshooting
Popular |
94 Results
- 1How to Embroider on Clothes. [Video instructions]
- 2How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 3How to Embroider on Shoes. [Video instructions]
- 4Maintenance (Cleaning around the needle plate) [ Video ]
- 5How to set up the cap frame. [Video instructions]
- 6How to Embroider on Cap. [Video instructions]
- 7When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 8How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 9How to set up the cap frame driver. [Video instructions]
- 10How to Embroider on Pet Collar. [Video instructions]
- 11Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 12Maintenance (Clean the hook) [ Video ]
- 13Fabric and Thread
- 14How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 15How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 16How to use the the versatile magnetic frame [Video instructions]
- 17How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 18How to Embroider on Bag. [Video instructions]
- 19"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 20"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 21"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 22"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 23"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 24How do I thread the machine? (Threading the upper thread)
- 25"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 26How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 27Maintenance (Clean the hook)
- 28"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean?
- 29Embroidery
- 30"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 31"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?
- 32"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 33"Trimming sensor error." message appears on the LCD. What does it mean?
- 34"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 35Maintenance (Oiling the machine) [ Video ]
- 36Maintenance (Cleaning the bobbin case) [ Video ]
- 37Maintenance (Cleaning the thread paths of the upper threads)
- 38"Stop while needle bar case transferring." message appears on the LCD. What does it mean?
- 39There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 40"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?
- 41"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 42"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
- 43"This pattern cannot combine." message appears on the LCD. What does it mean?
- 44"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 45"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 46"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 47"Can't use this key during camera mode." message appears on the LCD. What does it mean?
- 48"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
- 49"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 50"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?