Innov-is A150
 |
GYIK és hibaelhárítás |
20 Találatok
Sorrend
- 117/02/2022"Change the speed controller mode to "OFF"." message appears on the LCD.
- 219/07/2018"Change to the single needle mode, and replace the needle." appears on the LCD.
- 319/07/2018"The safety device has been activated." appears on the LCD.
- 418/07/2018"F10" appears on the LCD. What does it mean?
- 518/07/2018"F09" appears on the LCD. What does it mean?
- 618/07/2018"F08" appears on the LCD. What does it mean?
- 718/07/2018"OK to cancel the current pattern selection?" message appears on the LCD. What does it mean?
- 818/07/2018"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 918/07/2018"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 1018/07/2018"No more stitches can be combined." message appears on the LCD. What does it mean?
- 1118/07/2018"Lift the buttonhole lever." appears on the LCD.
- 1218/07/2018"Disconnect the foot controller." message appears on the LCD.
- 1318/07/2018"Return the bobbin winding shaft to left." message appears on the LCD. What does it mean?
- 1421/02/2018"F07" appears on the LCD. What does it mean?
- 1521/02/2018"F06" appears on the LCD. What does it mean?
- 1621/02/2018"F05" appears on the LCD. What does it mean?
- 1721/02/2018"F04" appears on the LCD. What does it mean?
- 1821/02/2018"F03" appears on the LCD. What does it mean?
- 1921/02/2018"F02" appears on the LCD. What does it mean?
- 2021/02/2018"F01" appears on the LCD. What does it mean?
