FAQs & Troubleshooting
Popular |
33 Results
- 1Differential feed adjustment
- 2How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 3Oiling
- 4Needles break
- 5The fabric does not feed through.
- 6Threading the left needle
- 7How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 8How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 9How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 10Cleaning
- 11Free-arm sewing (removing bed extension)
- 12Threading the upper looper
- 13Adjusting the thread tension dials
- 14Needle
- 15If threads break during sewing
- 16How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 17Adjusting the presser foot pressure
- 18How to set the thread change assembly (Two-thread sewing)
- 19Using the wide table
- 20How to attach and remove the presser foot
- 21How to remove and install the needle
- 22To secure chains
- 23Retracting knife
- 24Sewing Materials, Threads and Needles Comparison Chart
- 25Fabric is puckered
- 26Stitches are not uniform
- 27Skipped stitches
- 28Threads break
- 29Threading the right needle
- 30Threading the lower looper
- 31THREADING
- 32Preparation before threading
- 33How to use the thread spool cap